SENIOR PAPER PACKING MACHINERY MFG. CO.
3/5 Ply Automatic Corrugated Board Making Plant

3/5 Ply Automatic Corrugated Board Making Plant

Send Inquiry

3/5 Ply Automatic Corrugated Board Making Plant

We take immense pleasure to introduce ourselves as one of the well established manufacturers and suppliers of 3/5 Ply Automatic Corrugated Board Making Plant. Manufactured to perfection, our offered machines are widely renowned for their superlative features such as high operational fluency, less power consumption and user-friendly design. Used in packaging industry, this 3/5 Ply Automatic Corrugated Board Making Plant is an ideal solution for achieving higher production capacity and superior board quality.

Specifications:

Available Width: 1400mm,1500mm,1600mm,1800mm,2000mm,2500mm

Single Facer [ Double profile ]

Main Structure and Features

  • Individual drive box, separating dynamic oscillating, improves running stability.
  • Corrugating rolls Available with diameter 280mm,300mm and 320mm are made of EN 19.
  • Fine machined pressure roll with diameter 290mm,310mm,330mm and glue applicator roll (diameter 254mm) with optimum material.
  • Main bearings, lubricated with high-temperature grease. Provide outstanding sealing performance and reliable lubricating. Thin oil is optional.
  • a. The standard flute height

Sr.No

FLUTE TYPE

HEIGHT

FLUTE (30 CM)

PER METER

1

A (Broad)

4.2 to 4.6 mm

32 “ 38

107 - 127

2

B (Narrow)

2.4 to 2.8 mm

50 - 56

167 “ 187

3.

C

3.4 to 3.8 mm

38 - 44

127 “ 147

Main Technical Data
  • Machine speed Available: 60mpm,80mpm,100mpm.

PRE-HEATER

Main Structure and Features :

  • Double jacket preheating roll enhancing heat conduction efficiency.
  • Pre heater roll diameter : 400mm,600mm,800mm.
  • Manual wrap angle adjustment.

PRE-CONDITIONER

Main Structure and Features

  • Rotary preheating roll enhancing heat conduction efficiency.
  • A brake equipped for preheating roll enhancing heat conduction efficiency.
  • Manual wrap angle adjustment.
  • Pre-heater roll diameter : 400mm,600mm,800mm.
  • Wrap angle adjusting range : 600 ~ 1200


Overhead Bridge Conveyor

Main structure and Features

  • Frame made of channel iron, angle iron.
  • There is a single-faced web-elevating device with cotton belt equipped above each single facer.
  • Handrail and full covered reinforced footplates for safety protection.
  • Additional safe hand rail and stair.

Two sets of operation boxes with one at bridge and the other at glue machine.

Glue Machine

Main structure and Features
  • Suitable for single-wall, double-wall line respectively.
  • The engagement and disengagement between pressure roll and applicator roll are mechanically controlled.
  • Individual drive unit is equipped for applicator roll when double facer provides drive source so as to prevent glue from drying out. Self-power is optional.
  • Max. working speed : 60mpm,80mpm,100mp

Double Baker

  • Surface ground steel hot plates are of inner whirlpool structure, 175mm high and 550mm width.
  • Dense weight rolls of heating unit are manually and automatically lifted and lowered as a whole and also manually and automatically press the web in section independently of each other.
  • Dense weight rolls of cooling unit ensure perfect forming quality.
  • If configured with cut-off, the drive unit must be driven with external power.

Main drive roll knurling with diameter 645mm , featuring smooth and stable belt conveying.

  • Imported Felt with excellent heat emitting, ventilation, moisture-proof, and age-resistance.
  • Manual felt run controller for both felts. Automatic felt run controller is optional for the upper felt.
  • According to requirement, 10 hot plates for 3 Ply and 20 hot plates for 5 Ply can be configured in heating unit.

DRIVE ROLL STAND

Main Structure and Features

  • Main drive rolls knurling 860mm for upper roll 645mm for lower roll) .
  • The big gear of drive roll employs bevel gear, reducing noise dramatically.

Slitter Scorer


Main Structure and Features

    • Motorized switchover between two rotary working stations.
    • Slitting tool and male-to-female scoring wheel. Standard configuration
    • Slitting tool can be reground repeatedly, prolonging its life.
    • Axial adjustment for working station to meet web deviation.
    • Drive source is separate.
    • Point-to-flat scoring wheels are included (4sets)

    • Min. slitting space : 140mm.
    • Min. scoring space : 100mm.
    • Total power : 1.1kW (main drive is not included)

Cut-Off( Cnc Based)

Main Structure and Features

    • Two knife bars rotate to cut the board with shearing difference, featuring light impact and lower noise.
    • Precision adjustable anti-backlash gear ensures accurate mesh between knives.
    • Automatically synchronizing with the line.
    • Cutting precision is 2mm marked cutting can be realized.
    • Advanced man-machine interface and digital readout for production information display.

    • Cutting Length : 500-9999mm.
    • Cutting Precision : 1mm.